Cooper Bussmann 245U-E Manuel d'utilisateur télécharger pdf (Page 11)

www.cooperbussmann.com/wirelessresources

Cooper Bussmann 245U-E Wireless Ethernet Modem & Device Server User Manual

11Rev Version 2.19

Figure 9 Router

1.1 Getting Started Quickly

Most applications for the 245U-E require little configuration. The 245U-E has many sophisticated features, but if

you do not require these features this section will enable you to configure the units quickly.

To get started quickly:

1. First, read “Chapter 2 - INSTALLATION.” The 245U-E requires an antenna and a power supply.

2. Power on the 245U-E and make an Ethernet connection to your PC.

For detailed steps, refer to “3.2 Configuring the Unit for the First Time.”

3. Set the 245U-E address settings as described in “3.2 Configuring the Unit for the First Time.”

4. Save the configuration.

The 245U-E is now ready to use.

Before installing the 245U-E, bench test the system. It is much easier to locate problems when the equipment is all

together. There are other configuration settings, which may or may not improve the operation of the system. For

more information, refer to “3.0 Startup.”

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 115 116

Pas de commentaire

Cooper Bussmann 245U-E Manuel d'utilisateur Page 11